Vaterra Twin Hammer Build Updates

Recent updates:

-Decals 

-Painted interior

-Venom 2200mah 3s 50c lipo

-Castle Sv3/ 4600kv motor combo 

-Savox steering servo 

-FlySky radio gear.

I took my Twin Hammer trailing in Maine up a couple different mountains. I am very happy with the amount of torque and speed ilthe motor has. Everything worked perfectly in my opinion. I did strip the spur gear, but I upgraded to a Robinson Racing 87t hardened steel gear. Here's some of the pictures I took with my GoPro Hero 3+ Black camera:

And my personal favorite:

I stopped at a hobby store and picked up an Axial light bar. Here's how it looks mounted:

I have a GCM tower plate kit on order so that I can have upright shocks in the front instead of the cantilever setup. 

That's all for now, thanks for following!

Vaterra Twin Hammers Build

The kit is built! The build was very straight forward and I was really impressed with the quality of the parts. Some option parts were included with the kit such as the front and rear sway bars and a front diff locker. I chose to install the rear sway bars but left out the front sway bars. I also left the front diff unlocked because I will be using a Castle Creations brushless system. I went ahead and painted the body panels with Tamiya camel yellow paint. I did not install the interior yet, but here's some pictures of my mostly complete kit.

Thanks for following, more to come!

Vaterra Twin Hammers Kit Build

I sold my Traxxas Slash and bought the new Twin Hammers Kit from RPP! It looks like a fun build and I'm hoping it will fit in my garage along with my Jeep and TF2...

Stay tuned for more info!

RC4WD TF2: New 1.9 Axial Wheels and Gear Head RC Beadlock Rings

I found a set of Axial beadlocks with the Gear Head rings for cheap on RC Recyler's eBay store. I pulled the trigger, thinking I would use them on my Jeep. I ended up liking the Trail Ready beadlocks better on the Jeep, so I figured I would use these "new to me" wheels on the TF2. Check them out!

Thanks for following!

Stretched and Comp Cut Jeep JK Build

100mm King shocks have replaced the stock 90mm Axial shocks. The suspension has been adjusted so that the body is a lot lower than it was before! The hood has been hinged and the grille will be glued to the hood for easier access. I added an RC4WD Warn winch controller since I can't use my third channel. I will be adding a new stronger bumper for winch use.

Electronics: I chose to use a Castle Creations SV3 because I liked how it worked in my TF2. I'm using a Hitec metal gear servo for steering. An RC4WD rebuildable 35t motor is under the hood, literally. The head and tail lights are powered through an Axial simple led controller, while the Rigid light bars are powered directly from a 3s lipo. The Warn winch controller is powered by a 2s lipo. 

Ride height before:

Ride height after:

Thanks for following!

Stretched and Comp Cut Jeep JK Build: Led Lights

My Jeep is ready for some night driving! Besides the head and tail lights, I installed a 6" and 2" Rigid Industries light bars made by Vanquish Products. The 2" bar mount a throught the grille and the 6" uses the Vanquish Poison Spyder mounts. Both light bars are powered by a 1000mah 3s lipo. Here's some pictures:

I also made a floor for my garage!

Thanks for following!

Stretched and Comp Cut Jeep Jk Build

Wheels and tires are mounted! I used 1.9 RC4WD Compass tires on 2.2 Axial Trail Ready Beadlocks. I measured the tires and they scale out to be around 45" tires! I also modified an Axial Dingo front bumper to fit the Jeep. A licensed Warn winch by RC4WD is mounted on the front bumper. I added some locknuts to the suspension links for a wheelbase of about 13". Track width is about 10.5". I'm going to order a Castle Creations SV3  ESC and probably a Rigid Industries licensed Vanquish light bar for the Jeep and it will be almost done!

Thanks for following!

Stretched and Comp Cut Jeep Jk Build

Finally got the Jeep painted! Well all except for the hood at the moment. I also got two Axial Trail Ready Beadlocks mounted to some RC4WD Compass tires. I modded the wheels so that they are wider by combining both of the included hubs. Track width is about 10.5". I really like the way the wheels and tires look! Here's some pictures:

That's all for now, thanks for following the build!

Stretched and Comp Cut Jeep JK Build: It's Back!

Its been a while since I last updated the build. Nothing much has changed, but I did spray a coat of Plasti- Dip on the hood to see what needs sanding. I'm choosing to paint the Jeep with Plasti- Dip because of the matte black look. I have also decided to use RC4WD Compass tires and I ordered a set of Axial Trail Ready Beadlocks. I'll probably go with the Trail Ready's but I want to see how they look since they are 2.2 wheels inside 1.9 tires. I'm going to widen the stance of the vehicle so it will look similar to this:

That's all for now! Thanks for following!

Traxxas Slash All Fixed Up

Finally! I fixed my Slash! In an earlier post, I mentioned that I had an accident with my Traxxas Slash 4x4 and my cousins mini E- Revo. It was my fault, my chassis tub was cracked in half and the brand new driveshaft I had replaced a day before was bent. The mini E- Revo wasn't as damaged, but aluminum axle housings fixed the problem. A week ago, I placed a Tower Hobbies order and was able to fix my Slash. Electronics and axles were swapped onto the new tub. I also tossed the high speed pinion into the motor while the transmission was apart. To top it all off, I painted a new Proline Ford Raptor body for the Slash since all my other bodies were broken. Take a look at the finished product as well as how the Slash looked before...

Thanks for following!

10,000 Page- Views!

We recently hit 10,000 page views! Thank you everyone for viewing the blog!

GoPro Hero 3+ Black Edition & Pelican 1300 Case

I added another camera to my collection! I really enjoy using my GoPro Hero 3 White camera so I thought I would upgrade to the GoPro Hero 3+ Black edition camera. The new GoPro Hero 3+ Black housing is considerably smaller than the Hero 3 housing. Both the Hero 3 and Hero 3+ cameras are the same size so housings can be interchanged. I am excited to use the Hero 3+ camera so I will be posting some video soon. For more information on the GoPro Hero 3+ Black edition camera visit the GoPro website. Here's some pictures comparing the GoPro Hero 3 White and Hero 3+ Black:

I also purchased a Pelican 1300 case to protect my GoPros and accessories. The case comes with pick and pluck foam so that you can make anything fit perfectly in the case. Pelican makes their cases waterproof and shockproof so that everything inside the case will be safe if you drop it in the water. The case also has a pressure eqalization valve so that the air pressure inside the case is the same as outside the case. For more info visit the Pelican website. Here are some pictures of the case and how I made my GoPros and accessories fit inside:

Thanks for following!

Snow Fun with the Slashes

My brother and I had some fun with our Slashes in the snow a while back. Take a look at this picture!

Follow us on Facebook!

For any of you who are on Facebook, 'Like' our Facebook page to receive new blog posts, pictures and videos!
Like the page here: https://www.facebook.com/pages/Lets-Go-Muddin/502824609800046
Thanks for following!

Throwback Thursday Picture and Video: Jeep JK Plowing

Since we're having a snowstorm, I thought I would post a picture from last year's storm. This is an Axial Scx-10 with a plow mounted to it.

Check out the video here:

Proline Pro 2 Snow Bashing

My cousin came over with his Proline Pro 2. We had a blast speeding down the road with it and we didn't break it as many times as usual. I brought the camera out to take some pictures and here's some of my favorites:

Thanks for viewing!